illbruck

illbruck OS925 – Liquid seamless waterproofing

Advantages of illbruck OS925:
• UV-resistant
Once cured, OS925 withstands UV radiation; where there is no risk of mechanical damage it can be left uncovered.
• Flexible
OS925 can be used even in areas with high movement.
• Strong and durable
Fully cured, OS925 becomes a very strong, long-lasting material.
https://www.youtube.com/watch?v=XxchDsRaNCQ&t=7s
Where is OS925 used?
• Balconies and terraces
• Garages, shops, basements
• Underground parking
• Courtyards
• Sealing against ground moisture in floor structures and on walls in the basement parts of a building
• Sealing pre-engineered buildings, facade elements and modules, sandwich panels and roof windows.

illbruck window installation tapes are designed for both the outer and the inner sealing level of the window joint.

• Universal 2-in-1 window tape
Thanks to the tape's unique properties, it is used for both exterior and interior work. It seals the joint from inside the room, preventing moisture exchange between the installation joint and the interior reveal, and protects against weather moisture penetrating from outside;
• Exterior waterproofing tape protects against weather moisture penetrating from outside.

illbruck ME508 – Universal Window Tape is a fully adhesive non-woven window membrane tape: a self-adhesive strip runs the full width of one side, fleece covers the other.

Unique properties:
✅ One tape for interior and exterior use rules out installation mix-ups;
✅ Quick, easy fixing with a peel-off release film;
✅ UV-resistant;
✅ Can be repositioned during installation to correct errors where the tape is fixed; the adhesive bond gains strength over time.
✅ The strong, elastic tape can be plastered over without cracks forming later;
✅ Meets DBN V.2.6-31:2016, DSTU B V.2.6-79:2009 and DSTU-N B V.2.6-146:2010
✅ Complies with the RAL installation guidelines.

illbruck ME010 – Exterior vapor-permeable window tape, resistant to UV and fire. A tape unique in its fire performance: reaction-to-fire class B.

Advantages:
✅ B-s1, d0 fire classification to PN-EN 13501-1, for the adhesive system;
✅ High vapor permeability (Sd = 0.04 m);
✅ Permanently UV-resistant — for use on open and partly open facades (heat resistance up to 80°C in the self-adhesive VV version);
✅ Resistant to environmental exposure.

illbruck SP925 is a one-component, high-strength, highly elastic coating based on hybrid polymers, designed as a vapor-tight seal that stops air — the carrier of water vapor — passing through.

Unique properties:
✅ For window renovation projects where a window tape cannot be used;
✅ Forms a durable elastic film on most common building surfaces;
✅ No mixing, ready to use, no second coat needed;
✅ Optimal viscosity for precise application on uneven surfaces and around joints;
✅ Fast curing: about 20–30 min (at +23°C and 50% relative humidity);
✅ Free of solvents and isocyanates (GEV-EMICODE certificate with the highest safety class EC1 Plus — safe for health and the environment);
✅ Tested to ift-Rosenheim MO-01/1:2007-01 (Rosenheim, Germany) for use as a liquid membrane inside the window joint (it can coat the surface of cured installation foam or of multifunctional self-expanding sealing tape);
✅ Designed for passive buildings, where airtightness is tested by the Blower-Door method.

A pre-compressed self-expanding sealing tape is made of polyurethane foam and is both waterproof and vapor-permeable. It is used to seal joints in window and timber structures, and to seal closed and open joints on the exterior of building structures subject to high movement.

illbruck illmod Trio – Sealing tape

illbruck illmod Trio is an impregnated, pre-compressed self-expanding sealing tape for fast, reliable sealing when installing windows and doors. It provides a vapor-permeable seal on the principle of "tighter inside than outside".

Quick, simple installation
One tape provides water, thermal and vapor sealing at once. Sealing a joint with illbruck illmod Trio achieves more in a single operation, in a fraction of the time conventional installation takes.

Unique properties:
✅ Waterproof yet vapor-permeable on the outside, thermally insulating across the full width of the tape, and vapor-tight on the inside — all at once;
✅ Quality confirmed by independent external testing — MPA Bau Hannover, the building materials testing institute;
✅ Can be installed in any weather;
✅ Complies with the RAL installation guidelines;
✅ Simple, fast window sealing in one step;
✅ Meets DBN V.2.6-31:2016, DSTU B V.2.6-79:2009 and DSTU-N B V.2.6-146:2010
✅ Weather-resistant;
✅ Part of the illbruck "i3" window joint sealing system.

illbruck TP610 – Sealing tape

illbruck TP610 is a vapor-permeable self-expanding sealing tape impregnated with an acrylate polymer compound. It seals joints in window, aluminum and timber structures.

Advantages:
✅ Water- and airtight;
✅ Vapor-permeable;
✅ Can be installed in any weather;
✅ Stays elastic in moving joints;
✅ Driving-rain resistance up to 600 Pa;
✅ UV-resistant — class BG1.

illbruck ME220 is an exterior EPDM facade membrane that seals facade, window and door joints and other building joints and gaps against moisture and air on the outer side of the connection. The membrane contains no solvents that could penetrate and damage the surfaces it touches.

Advantages of illbruck ME220:
✅ Excellent resistance to mechanical loads;
✅ Accommodates movement of up to 25%;
✅ Resistant to UV and other environmental exposure;
✅ Easily formed around non-standard joint details.

Adhesive for the EPDM membrane

illbruck OT015 is a synthetic-rubber-based polymer adhesive for bonding the illbruck ME220 membrane to aluminum, steel, galvanized steel, rigid PVC and porous surfaces.

Main advantages:
✅ Durable;
✅ Water-resistant;
✅ Extremely strong;
✅ Quick and easy to apply;
✅ Withstands temperature swings.

illbruck ME110 – Exterior membrane is a special membrane for sealing gaps on the facade against air, wind and water — above all at the threshold or window sill, where it serves as a seal to DIN 18195. illbruck ME110 adheres very well to standard building surfaces: concrete, masonry, timber, metal and various bitumens.

Advantages:
✅ Resistant to environmental exposure;
✅ Application temperature from -5°C (primer recommended);
✅ Can be applied to slightly damp surfaces;
✅ Air-, wind- and watertight;
✅ Supplied with a protective release paper.

illbruck FM330 is a highly elastic installation foam.
Because FM330 stays permanently elastic, it gives a reliable seal even in moving installation joints.

Product advantages:
✅ Application temperature from -3°C to +35°C;
✅ 880 ml can;
✅ Successfully tested by ift Rosenheim (Germany);
✅ Elasticity up to 50%;
✅ Airtight up to 1750 Pa;
✅ Sound insulation up to 63 dB;
✅ 35% self-recovery and easy to repair;
✅ Maximum insulation and an excellent seal;
✅ Low expansion means less waste when trimming;
✅ Resistant to heat, water and a range of chemicals;
✅ Can be painted and plastered over.

illbruck FS500 is a one-component neutral-cure silicone for sealing construction and glazing joints. Once cured it forms a low-modulus, elastic joint. It is used for cladding and glazing joints as well as expansion joints.

Advantages:
✅ Strong adhesion to most building materials without a primer;
✅ Odorless neutral cure;
✅ Neutral cure means it can be used on sensitive surfaces such as lead, galvanized steel and coated glass;
✅ Resistant to UV, acid rain, ozone, moisture and extreme temperatures;
✅ Easy to apply with a gun;
✅ Tools off easily to a neat finish;
✅ Cures quickly.

illbruck SP525 is an elastic one-component hybrid sealant with very good resistance to weather, aging and light. It is recommended for sealing building structures to ISO EN 11600 and for window and door joints. The product is odorless, largely retains its elasticity and adheres excellently to most surfaces.

Advantages:
✅ Environmentally friendly;
✅ Tools off to a smooth finish;
✅ Free of solvents, isocyanates and silicone;
✅ Easy to apply, does not string;
✅ Resistant to UV and weather.

illbruck SP351 is a one-component, permanently elastic hybrid adhesive with high initial strength — a patented innovation for the window industry. Built on the safe illbruck SP hybrid polymer technology, it has very high initial grab. The adhesive is chemically neutral, non-corrosive and almost odorless, with excellent resistance to UV, weather and aging. This allows the window to be wedged before multifunctional expanding tapes are applied, so several steps of window installation can be handled with one product.

Advantages:
✅ Injection wedging of window units (providing point mechanical
support for the window unit);
✅ Mechanical and sealing properties confirmed by ift Rosenheim (compressive strength and airtightness tests, 60 kg load per injection wedging point);
✅ Recommended for bonding interior and exterior window sills to a prepared surface.