Michael Weinig Inc.

On the road to profitability

Individually designed windows in small batches of special sizes — that is the reality of window production today. Efficient production by conventional methods has long been impossible. WEINIG has a ready solution to this problem: window-by-window production. In a single pass, sash after sash and frame after frame are fully machined: cutting to length, ripping the glazing bead, jointing, grooving, profiling along the length and contour milling. That way you can organize one-off production yourself.

WEINIG offers a wide range of products from a single source, from a small stand-alone machine to a highly complex line.

With us you gain the following advantages:
short production times
even workload
unobstructed flow of the lumber
no drawing work
no searching and sorting
no warehousing.

And for you that means: high profitability.

With this window-by-window method, WEINIG makes it possible to improve the organization of the production process further. For example, when a single part is made, the sash parts need no contour milling. Several profiles can also be produced with a single tool.

This greatly reduces the total number of tools set up, and so set-up times are reduced to a minimum.

All parts in a single pass!
Paired parts with tenon and mortise machining!
Productivity up by 70%!
Unicontrol 6 from Weinig will instantly turn you into a specialist in small-batch and one-off window production. You can fulfil any order straight away while using minimal storage space. From now on you can strike set-up time out of your costing. Without a tool change you machine the tenon, the mortise and the frame profile of absolutely any shape and size. Just press the buttons!

Unicontrol 6 is as reliable at cutting to length as it is at ripping glazing beads, contour milling and making muntin bars for window sashes. Unicontrol 6 lets you not only produce faster and at more attractive prices, but also improve the quality of the product itself. Every surface leaving this machine is flawless and the corner joints fit impeccably.

Window-by-window production brings you more!
With Unicontrol 6 you master window-by-window production and can fulfil any incoming order straight away. There is no longer any need to make windows "for stock", and you save substantially on storage. Window-by-window production also means: no more drawing, no more searching, no more sorting!
Display-based control system:
You can program up to 99 window types of 8 parts each. The machine has a built-in operator guide and a fault diagnosis system!

Equipment package for paired parts:
Two blanks of equal length with identical cross profiles are clamped in pairs and machined on the cross-machining table. The two parts are then separated automatically and passed on to longitudinal profiling.

Tenoning spindle with stepless adjustment. The cut-to-length unit with top edge rounding is combined with a horizontal milling unit for bottom edge rounding.

The cross stop allows parts of different widths to be machined one after another, with width differences of up to 100 mm — for example a 110 mm mullion and a 50 mm muntin bar.

Production of angled windows without chipping or tear-out. Angles and lengths, together with electronic positioning of the length stop, are set via the display readout. Data is transferred by diskette or online. A laser beam shows the cutting line, and additional side clamps ensure optimal part transport.

A climb-cutting spindle guarantees high-quality contour milling. Indexed feed rollers shorten the time glued sashes spend passing through the machine. Small sashes are clamped in a special automatic carriage.

The top grooving spindle is used to cut grooves for blinds or for window sill joints. Groove depth is variable.

WEINIG Conturex:
high productivity in every machine class.
With the new Conturex profiling center series, C 114 to C 226, a new WEINIG world opens up in window production. All the advantages of the proven, reliable Conturex are now available in individual machine classes. Every Conturex does the work of 5 machines in a single pass. Ultra-precise, fully automatic and flexible. Machining of every kind of corner joint, longitudinal machining outside and inside, drilling, grooving, template milling — the Conturex profiling center handles it all! Window-by-window production from a completely new angle: precise positioning with the collet table, high flexibility thanks to a tool changer magazine with approx. 175 positions. Several profiles can be clamped on one shaft. Complete window production in one clamping, up to 6 m long, in a fully automatic process.
WEINIG offers you its experience of installing 3,000 window machines, so that you too are equipped for every future requirement.

Conturex offers many advantages over your competitors:
Complete machining in one clamping, for maximum precision.
Machining with no set-up time, even for small batches.
Fully automatic production requiring few operators
Modular design for different capacity requirements.